Walkway construction in Auburn AL - a path that fits your yard and your budget
Worn grass path or a cracked walk to the door? We build a new one in poured concrete, stamped concrete, pavers or stone.
- Licensed and insured.
- Free on-site estimates.
- We reply within 1 business day.
What does it take to build a walkway in Auburn?
Walkway construction in Auburn, AL means leveling the ground along your route where it needs it, then pouring concrete or setting pavers or stone, so you end up with a firm path that runs straight to the door or curves around the beds.
Most calls start with a muddy track across the lawn, an old concrete walk that's cracked and lifted, or a new house with no real way from the driveway to the door. The price moves mostly with the material, the length and width of the path, how much leveling the ground needs and whether it curves, since curves mean more cutting and forming. The schedule turns on the material and the weather, and on city approval if your house is in one of Auburn's historic districts, which we take care of when the job needs it. The estimate I send after seeing your route lays out what we'd build and why, so you're not guessing at the number.
How do you know it's time for a new walkway?
A worn track in the grass
Everyone cuts across the same line, so the grass dies and the strip turns to mud after a rain. Waiting usually means mud on the floors and a bare patch in the lawn that won't come back while people keep walking on it.
Cracked or lifted slabs
An old walk with broken pieces or edges sticking up usually means the ground or the base under it moved. Patching the top won't hold if that cause is still there, and a lifted edge is an easy place for someone to trip.
Water sitting on the path
Puddles that stay on the walk, or a path that sheds water toward the house, usually mean the slope was set wrong. Standing water keeps the surface slick and keeps washing soil out from along the edges.
How we handle walkway construction
I start by laying out poured, stamped, paver and stone paths side by side with what each one gives up, and you pick the one that fits the route, the look and what you want to spend. Then we mark the route, dig out, level the ground where it needs it and pack the base, and either pour and finish the concrete or set the pavers or stone, and we clean up and haul off the dirt before we leave.
A walk often ties into other masonry around it. If you want a brick wall along one side of the path or framing the entry, that's our brick wall installation work, and our stone masonry work covers the natural stone around a path, so the walk and everything beside it come from one crew and match.
Poured concrete
A plain finished slab suits a straight, everyday path from the driveway to the door, because it's the simplest of the four to build. The tradeoff is looks, since it reads as plain gray concrete.
Stamped concrete
This suits a homeowner who wants a patterned path but likes the simplicity of one poured slab. It's still one slab underneath, so if it cracks, the crack runs right through the pattern.
Pavers
Individual pieces set on a packed base suit curved paths and anyone who likes that a single piece can be lifted and reset later. They take more hands-on labor than a slab, and they rely on a solid edge to stay put.
Natural stone
Flagstone, slate, granite or travertine suit older houses and garden paths where you want the real thing for the long haul. It's the priciest choice to buy and set, and every piece has to be fitted by hand.
Get a free walkway estimate for your path
Send the form and we'll get back to you within one business day to set a time. I'll come out, walk the route with you and send a free estimate, with no obligation to go ahead.
(334) 780-0060- Based in
- Auburn, AL 36830
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What happens after you call about a walkway in Auburn?
Here's how a walkway job runs with us, from your first call to the walk-through at the end, and who you'll be dealing with along the way.
Call or send the form
Call (334) 780-0060 or use the form, and we'll set up a time for me to come see the path. It helps to know roughly how long the walk is, what material you're leaning toward and whether your house is in one of Auburn's historic districts.
I look over the route
I walk where the path will go, check the ground and the slope, and ask a lot of questions about how you use that side of the yard. The estimate I send says what we'll build, in which material and why, so you can weigh your options on paper before you commit.
We handle paperwork, then build
If the job needs a permit or historic district approval, we take care of the paperwork before we break ground. Then I work alongside our crew to dig, level, set the base and pour or lay the path.
We walk it together
When the path is finished, we clean up and walk it with you. That's your chance to look over every edge and joint before we call it done.
Why Auburn homeowners call United Auburn Concrete and Masonry for walkways
The owner looks at every job
I come out to look at every walkway myself, and I work alongside our crew when we build it. The person who measured your route is on site making sure it gets built the way we planned.
Six years running this business
I started this business in 2020 after learning the trade from my dad, handing him brick on his jobs. When an old walk has cracked or heaved, I want to know why before we pour or lay anything new.
Licensed and insured for your project
We're licensed and insured. If something goes wrong on your property during the work, you're not the one left holding it.
Paths that suit older Auburn homes
A lot of our calls come from owners of older brick homes around Auburn, and a new walk should look like it belongs to the house. On those jobs I'll usually point you toward pavers or stone that sit well with old brick rather than a plain gray slab.
The right path is the one that fits how you actually get to your door, so let's look at it together. Send us a few details about your path or call (334) 780-0060.
Planning a walkway and its route at an Auburn home
Whether a walkway on your lot needs a permit isn't something I'll guess at, so we check with the office that covers your address, and in Auburn that's the city's Development Services Building. If your house is in one of Auburn's Historic Districts, exterior work that may show from a public street or sidewalk needs a Certificate of Appropriateness, and the application asks for details of what you plan to build, so we settle the path's route and look before anything gets filed. Paved paths add hard surface, so on a lot that's already mostly roof and driveway I check the city's zoning standards too, and if a plan misses one, such as an impervious surface limit, the owner can apply to the city for a variance. We take care of that permit paperwork when a job needs it.
We're based in Auburn and build walks across the cities around it. Older brick homes with narrow, settled front walks make up a lot of what we see, here and on jobs in Opelika and Valley, and the new path usually starts with finding out why the old one moved.
Questions about walkway construction in Auburn
How much does a paver walkway cost in Auburn, AL?
A paver walkway with about 220 square feet of finished surface usually costs about $4,500 to $6,000 per job across the US. That's a national figure for one size, so a shorter or straighter path, more leveling or a different material will move it. Your own number for Auburn comes from the estimate after I've seen the route.
Is stamped concrete cheaper than stone for a walkway?
Usually, yes. Stamped concrete is poured concrete with a pattern pressed in, so you get the look of brick, stone or tile without paying their higher price. Real stone like flagstone, slate, granite or travertine costs more, but it's very durable and less likely to crack from the weather.
Can I build a walkway myself?
One cost guide says you may, if it's a straight walk on ground that needs no leveling and you've mixed and poured concrete before. The same guide leaves leveling, curved walks and paver walks to professionals. If you're on the fence, I'm glad to look at the route and tell you which side of that line it falls on.
Do I need city approval to replace an old walkway in an Auburn historic district?
Not always, because work that city staff deem routine maintenance needs no Certificate of Appropriateness. New exterior work that may show from a public street or sidewalk does need one, as covered above. Before you tear out an old walk, we ask the city which side of that line your job falls on.
How long does it take to build a concrete walkway compared to pavers?
A poured concrete walk usually goes in quicker than pavers, because nobody has to lay and grout each piece by hand. If you need the path soon, concrete is the faster choice. For pavers, the trade's guide calls for laying the sand and pavers outside heavy rain, so a wet spell can push back the start.
What is the best way to keep a paver walkway from shifting?
Start with a solid edge restraint, which paver trade guidance calls essential because it holds the pavers and sand together. It can be steel, aluminum, troweled or buried concrete, or plastic edging made for concrete pavers. It's also worth asking any contractor how thick the packed base will be, since trade guidance sets a minimum for walkways on well-drained soil.
Related masonry work around a new walkway
Brick wall installation
Worth a look if your walk runs past a slope or bed that needs holding back, or you want brick at the entry to match the house.
Stone masonry
If you go with flagstone or slate, the same stonework can carry on into steps, a seat wall or a small patio where the path ends.
Service areas for walkway construction near Auburn
United Auburn Concrete and Masonry is based in Auburn, Alabama, and builds walkways across the cities around it, including Smiths Station and Tuskegee. Seven cities have their own page below, and we work in others nearby too.
Auburn, AL
Have us look at your walkway route
Comparing four materials is a lot easier standing on the actual route with someone who's built all of them.